Vertical Turret Lathe STANKO SEDIN 1M557

Category Lathes STANKO SEDIN ›
Manufacturer STANKO SEDIN ›

ARCHIVED AD
Vertical Turret Lathe STANKO SEDIN 1M557 was manufactured by the machine manufacturer STANKO SEDIN. Machine STANKO SEDIN 1M557 was built in 1973 year.

General data

Location Slovakia
Year of manufacture 1973
Warranty Without warranty
Technical condition Good
Loading The seller organizes the loading - included in the price of the machine
Payment Before receipt
Stock number 151024

Technical parameters

Diameter of the table 110.2 in
Maximum turning diameter 124 in
Maximum height of the workpiece 63 in
Maximum table load 17.6 short ton
Maximum length of the vertical travel of the transverse beam 70.9 in
Maximum travel length of the carriage over the transverse beam 29.5 in
Number of the rotary speed of the table 16 pcs
Minimum table rotary speed 31.5 1/min
Maximum table rotary speed 315 1/min
Number of vertical carriages 2 pcs
Total power demand 76.4 hp
Number of feed rates 16 pcs
Maximum feed rate of the carriage over the transverse beam 0.0104987 in/s
Length of the lathe 234.8 in
Width of the lathe 246.7 in
Height of the lathe 190.9 in
Weight of the lathe 46.3 short ton

Equipment

4-jaw chuck
Hydraulic chuck
Double column
Swivel horizontal carriage
Vertical carriage with a turret
Additional horizontal carriage
Lighting
Technical documentation
‹ previous FACCIN 4HEL TOS Celakovice NP FO 10 STANKO SEDIN 1M557 DECKEL MAHO DMC 50 V EXERON DIGMA HSC 300 next ›