Vertical Milling Machine STANKOIMPORT 6 Р 13

Category Milling Machines STANKOIMPORT ›
Manufacturer STANKOIMPORT ›

ARCHIVED AD
Vertical Milling Machine STANKOIMPORT 6 Р 13 was manufactured by the machine manufacturer STANKOIMPORT. Machine STANKOIMPORT 6 Р 13 was built in 1977 year.

General data

Location Russia
region Воронежская область
Year of manufacture 1977
Warranty Without warranty
Technical condition Good

Technical parameters

Length of the working table 63 in
Width of the working table 15.7 in
Maximum table load (evenly distributed) 2755.8 lb
Power of the spindle drive 14.7 hp
Minimum rotary speed of the spindle 31.5 1/min
Maximum rotary speed of the spindle 1600 1/min
Minimum distance of the spindle from the table 2.8 in
Maximum distance of the spindle from the table 19.7 in
Travel length X-axis (mechanical feed) 39.4 in
Travel length Y-axis (mechanical feed) 15.7 in
Travel length Z-axis (mechanical feed) 16.9 in
Maximum feed rate in X-axis 2.6 in/s
Maximum feed rate in Y-axis 2.6 in/s
Maximum feed rate in Z-axis 0.872703 in/s
Machine height 95.7 in
Machine length 101.2 in
Machine width 88.7 in
Machine weight 4.7 short ton

Equipment

no data
‹ previous STANKOIMPORT 7 А 412 STANKOIMPORT 1 К 62 STANKOIMPORT 6 Р 13 STANKOIMPORT НК 3318 STANKOIMPORT 6 Р 81 next ›