Universal Milling Machine KNUTH UWF 15 B

Category Milling Machines KNUTH ›
Manufacturer KNUTH ›

ARCHIVED AD
Universal Milling Machine KNUTH UWF 15 B was manufactured by the machine manufacturer KNUTH. Machine KNUTH UWF 15 B was built in 2007 year.

General data

Location Poland
region Dolnośląskie
Year of manufacture 2007
Warranty Without warranty
Technical condition Good
Payment Before receipt
Transport The buyer organizes the transport at his own cost

Technical parameters

Length of the working table 78.7 in
Width of the working table 19.7 in
Maximum table load (evenly distributed) 3968.3 lb
Minimum rotary speed of the vertical spindle 30 1/min
Maximum rotary speed of the vertical spindle 2050 1/min
Minimum distance of the spindle from the table 3.1 in
Maximum distance of the spindle from the table 20.9 in
Travel length X-axis (mechanical feed) 59.1 in
Travel length Y-axis (mechanical feed) 25.6 in
Travel length Z-axis (mechanical feed) 19.7 in
Maximum feed rate in X-axis 86.6 in/s
Maximum feed rate in Y-axis 86.6 in/s
Maximum feed rate in Z-axis 43.3 in/s
Total power demand 22.8 hp
Number of T-slots in the table 5 pcs
Machine height 76.4 in
Machine length 84.3 in
Machine width 117.6 in
Machine weight 6.1 short ton

Equipment

no data
‹ previous ACCUTEX AL-400SA OCEAN TECHNOLOGIES CO RIVER KNUTH UWF 15 B NOVAR ACTIVE 4000 TSCHUDIN Rettifica per tondi 1000x175 next ›