Universal Lathe Poręba TRA 70B
Universal Lathe Poręba TRA 70B was manufactured by the machine manufacturer Poręba. Machine Poręba TRA 70B was built in 1970 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1970 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum length of the turning | 157.5 in |
| Turning diameter over bed (max) | 26.8 in |
| Turning diameter over cross slide (max) | 16.5 in |
| Turning diameter in gap | 37.8 in |
| Spindle bore | 3.1 in |
| Minimum rotary speed of the spindle | 10 1/min |
| Maximum rotary speed of the spindle | 1000 1/min |
| Maximum longitudinal feed rate (Z-axis) | 2.6 in/s |
| Total power demand | 18.8 hp |
| Length of the lathe | 247 in |
| Width of the lathe | 78 in |
| Height of the lathe | 51.4 in |
| Weight of the lathe | 6.3 short ton |
Equipment | |
|---|---|
| 3-jaw chuck | |
| 4-jaw chuck | |
| Steady rest | |
| Technical documentation | |
