- UniMachines
- ›
- CNC Lathes and Turning Centers
- ›
- Turning and Milling Centers
- ›
- Turning and Milling Centers OKUMA
- ›
- Turning and Milling Centers OKUMA Multus B 400 C 1500 Super BigBore
Turning and Milling Center OKUMA Multus B 400 C 1500 Super BigBore
Turning and Milling Center OKUMA Multus B 400 C 1500 Super BigBore was manufactured by the machine manufacturer OKUMA. Machine OKUMA Multus B 400 C 1500 Super BigBore was built in 2008 year.
General data | |
|---|---|
| Location | Germany |
| Year of manufacture | 2008 |
| Warranty | Without warranty |
| Technical condition | Very good |
| Loading | The seller organizes the loading - included in the price of the machine |
| Payment | Before receipt |
| Transport | The seller organizes the transport at a surcharge |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum turning length (Z-axis) | 59.1 in |
| Maximum turning diameter | 28 in |
| Maximum travel length in the X-axis | 27.2 in |
| Maximum feed rate in X-axis | 1574.8 in/min |
| Maximum feed rate in Z-axis | 0 ft/min |
| Number of turning spindles | 1 pcs |
| Maximum power of the main spindle (turning) | 40.2 hp |
| Diameter of the turning spindle bore | 3.6 in |
| Maximum rotary speed of the main spindle | 2800 rpm |
| Number of tool turrets | 1 pcs |
| Total number of tools in the turret | 80 pcs |
| Number of driven tools in the turret | 80 pcs |
| Maximum power of the milling spindle | 18.8 hp |
| Number of tools in the magazine | 80 pcs |
| Number of synchronous axles | 7 pcs |
| Maximum travel length in the Y-axis | 9.1 in |
| Maximum rotary speed of the driven tool | 6000 rpm |
| Length of the lathe | 196.9 in |
| Width of the lathe | 117.7 in |
| Height of the lathe | 118.1 in |
| Weight of the lathe | 17085.8 short ton |
Equipment | |
|---|---|
| OSP 200 L CNC | |
| Electronic wheel for manual operation | |
| Ethernet (LAN) | |
| Chip transporter | |
| Spindle with a through hole | |
| C-axis synchronous | |
| Y-axis | |
| Driven Tools | |
| Through spindle coolant | |
| Automatic feed rate of tailstock | |
| Hydraulic chuck | |
| Technical documentation | |
| CE Declaration | |
