- UniMachines
- ›
- Sheet Metal Lines
- ›
- Transverse Cutting Lines
- ›
- Transverse Cutting Lines UNGERER
- ›
- Transverse Cutting Lines UNGERER 1500 / 3 / 23
Transverse Cutting Line UNGERER 1500 / 3 / 23
Transverse Cutting Line UNGERER 1500 / 3 / 23 was manufactured by the machine manufacturer UNGERER. Machine UNGERER 1500 / 3 / 23 was built in 1986 year.
General data | |
|---|---|
| Location | Poland |
| region | Śląskie |
| Year of manufacture | 1986 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | Machine disassembled |
| Stock number | 1 |
Technical parameters | |
|---|---|
| Maximum thickness of the cut sheet metal (Normal Steel) | 0.11811 in |
| Minimum thickness of the sheet metal | 0.019685 in |
| Maximum weight of the sheet metal coil | 33069.3 lb |
| Maximum internal diameter of the sheet metal coil | 72 in |
| Minimum width of the metal sheet | 13.8 in |
| Maximum width of the metal strips | 59.1 in |
| Maximum feed rate | 787.4 in/min |
| Accuracy of the cutting | 0.019685 in |
Equipment | |
|---|---|
| no data | |
