TOS / page 6
Year of manufacture : 1990
Maximum length of the turning : 210 in
Turning diameter over bed (max) : 35 in
Turning diameter over cross slide (max) : 24 in
Spindle bore : 3.5 in
Maximum length of the turning : 210 in
Turning diameter over bed (max) : 35 in
Turning diameter over cross slide (max) : 24 in
Spindle bore : 3.5 in
United States
Illinois
Illinois
Year of manufacture : 2000
Maximum length of the turning : 120 in
Turning diameter over bed (max) : 25 in
Turning diameter over cross slide (max) : 14 in
Turning diameter in gap : 32 in
Maximum length of the turning : 120 in
Turning diameter over bed (max) : 25 in
Turning diameter over cross slide (max) : 14 in
Turning diameter in gap : 32 in
United States
Illinois
Illinois
Year of manufacture : 1990
Maximum length of the turning : 157.5 in
Turning diameter over bed (max) : 15 in
Spindle bore : 2.7 in
Power of the spindle : 23.5 hp
Maximum length of the turning : 157.5 in
Turning diameter over bed (max) : 15 in
Spindle bore : 2.7 in
Power of the spindle : 23.5 hp
6395 USD
Ukraine
Київська область
Київська область
Year of manufacture : 1980
Maximum diameter of the grinding (shaft) : 10.2 in
Liquid cooling system
Maximum diameter of the grinding (shaft) : 10.2 in
Liquid cooling system
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1983
Length of the working table : 78.7 in
Width of the working table : 16.7 in
Travel length X-axis (mechanical feed) : 55.1 in
Travel length Z-axis (mechanical feed) : 18.1 in
Length of the working table : 78.7 in
Width of the working table : 16.7 in
Travel length X-axis (mechanical feed) : 55.1 in
Travel length Z-axis (mechanical feed) : 18.1 in
3101 USD
Poland
Małopolskie
Małopolskie
Year of manufacture : 1985
Maximal module : 0.314961 in
Maximum diameter of the gear wheel (external gear wheel) : 19.7 in
Maximum height of the gear wheel : 4.9 in
Minimum number of strokes of the slider per minute : 45 1/min
Maximal module : 0.314961 in
Maximum diameter of the gear wheel (external gear wheel) : 19.7 in
Maximum height of the gear wheel : 4.9 in
Minimum number of strokes of the slider per minute : 45 1/min
Spain
Barcelona
Barcelona
Year of manufacture : 1987
Maximal module : 0.629921 in
Maximum diameter of the gear wheel : 98.4 in
Maximum table load : 15432.4 lb
Maximum distance from the working table axis to the milling cutter axis : 7.1 in
Maximal module : 0.629921 in
Maximum diameter of the gear wheel : 98.4 in
Maximum table load : 15432.4 lb
Maximum distance from the working table axis to the milling cutter axis : 7.1 in
Spain
Barcelona
Barcelona
Year of manufacture : 1998
CNC control model : HEIDENHAIN 430
Length of the working table : 63 in
Width of the working table : 24.8 in
Number of CNC controlled axles : 5 pcs
CNC control model : HEIDENHAIN 430
Length of the working table : 63 in
Width of the working table : 24.8 in
Number of CNC controlled axles : 5 pcs
34884 USD
Germany
Bayern
Bayern
Year of manufacture : 1986
Maximum length of the turning : 39.4 in
Turning diameter over bed (max) : 12.6 in
Spindle bore : 1.5 in
Minimum rotary speed of the spindle : 20 1/min
Maximum length of the turning : 39.4 in
Turning diameter over bed (max) : 12.6 in
Spindle bore : 1.5 in
Minimum rotary speed of the spindle : 20 1/min
Germany
Sachsen
Sachsen
Year of manufacture : 1986
Spindle bore : 3.9 in
Length of the working table : 44.1 in
Width of the working table : 43.3 in
Maximum table load (evenly distributed) : 6613.9 lb
Spindle bore : 3.9 in
Length of the working table : 44.1 in
Width of the working table : 43.3 in
Maximum table load (evenly distributed) : 6613.9 lb
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1999
CNC control model : FANUC 0i-TD
Diameter of the table : 31.5 in
Maximum turning diameter : 45.3 in
Maximum height of the workpiece : 25.6 in
CNC control model : FANUC 0i-TD
Diameter of the table : 31.5 in
Maximum turning diameter : 45.3 in
Maximum height of the workpiece : 25.6 in
India
Maharashtra
Maharashtra
Year of manufacture : 1988
Spindle bore : 3.1 in
Travel length X-axis (mechanical feed) : 59.1 in
Travel length Y-axis (mechanical feed) : 39.4 in
Travel length Z-axis (mechanical feed) : 39.4 in
Spindle bore : 3.1 in
Travel length X-axis (mechanical feed) : 59.1 in
Travel length Y-axis (mechanical feed) : 39.4 in
Travel length Z-axis (mechanical feed) : 39.4 in
India
Maharashtra
Maharashtra
Year of manufacture : 1980
Diameter of the table : 47.2 in
Maximum turning diameter : 55.1 in
Maximum height of the workpiece : 39.4 in
Maximum table load : 4.4 short ton
Diameter of the table : 47.2 in
Maximum turning diameter : 55.1 in
Maximum height of the workpiece : 39.4 in
Maximum table load : 4.4 short ton
India
Maharashtra
Maharashtra
Year of manufacture : 1980
Length of the working table : 82.7 in
Width of the working table : 29.1 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Permanent magnetic chuck
Length of the working table : 82.7 in
Width of the working table : 29.1 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Permanent magnetic chuck
India
Maharashtra
Maharashtra
Year of manufacture : 1983
Maximal module : 0.15748 in
Maximum diameter of the gear wheel : 7.9 in
Maximal module : 0.15748 in
Maximum diameter of the gear wheel : 7.9 in
India
Maharashtra
Maharashtra
Year of manufacture : 1986
Length of the working table : 118.1 in
Width of the working table : 27.6 in
Length of the working table : 118.1 in
Width of the working table : 27.6 in
India
Maharashtra
Maharashtra
Year of manufacture : 1995
Length of the working table : 59.1 in
Width of the working table : 11.8 in
Maximum longitudinal feed rate (Z-axis) : 80.7 in/min
Maximum length of grinding (without the grinding wheel output) X-axis : 59.1 in
Length of the working table : 59.1 in
Width of the working table : 11.8 in
Maximum longitudinal feed rate (Z-axis) : 80.7 in/min
Maximum length of grinding (without the grinding wheel output) X-axis : 59.1 in
India
Maharashtra
Maharashtra
Year of manufacture : 1980
Maximal module : 0.23622 in
Minimal module : 0.03937 in
Maximum diameter of the gear wheel : 11 in
Diameter of the table : 16.5 in
Maximal module : 0.23622 in
Minimal module : 0.03937 in
Maximum diameter of the gear wheel : 11 in
Diameter of the table : 16.5 in
India
Maharashtra
Maharashtra
Year of manufacture : 1989
Spindle bore : 3.1 in
Travel length X-axis (mechanical feed) : 59.1 in
Travel length Y-axis (mechanical feed) : 39.4 in
Travel length Z-axis (mechanical feed) : 39.4 in
Spindle bore : 3.1 in
Travel length X-axis (mechanical feed) : 59.1 in
Travel length Y-axis (mechanical feed) : 39.4 in
Travel length Z-axis (mechanical feed) : 39.4 in
India
Maharashtra
Maharashtra
Year of manufacture : 2004
CNC control model : HEIDENHAIN TNC 430
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
CNC control model : HEIDENHAIN TNC 430
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
Italy
Brescia
Brescia
Year of manufacture : 2003
CNC control model : HEIDENHAIN iTNC 530
Spindle bore : 5.1 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
CNC control model : HEIDENHAIN iTNC 530
Spindle bore : 5.1 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Italy
Brescia
Brescia
Year of manufacture : 2006
CNC control model : HEIDENHAIN TNC 530
Spindle bore : 5.5 in
Length of the working table : 63 in
Width of the working table : 70.9 in
CNC control model : HEIDENHAIN TNC 530
Spindle bore : 5.5 in
Length of the working table : 63 in
Width of the working table : 70.9 in
Italy
Brescia
Brescia
Year of manufacture : 2001
CNC control model : HEIDENHAIN TNC 426
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 70.9 in
CNC control model : HEIDENHAIN TNC 426
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 70.9 in
Italy
Brescia
Brescia
Year of manufacture : 1991
CNC control model : HEIDENHAIN TNC 355
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 86.6 in
CNC control model : HEIDENHAIN TNC 355
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 86.6 in
Italy
Year of manufacture : 1993
Length of the working table : 24.8 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.6 in
Power of the spindle drive : 2.9 hp
Length of the working table : 24.8 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.6 in
Power of the spindle drive : 2.9 hp
Italy
Year of manufacture : 1987
Maximum length of the grinding (shaft) : 59.1 in
Center height : 6.2 in
Maximum weight of the shaft between the centers : 551.2 lb
Power of the grinding wheel spindle drive : 10.1 hp
Maximum length of the grinding (shaft) : 59.1 in
Center height : 6.2 in
Maximum weight of the shaft between the centers : 551.2 lb
Power of the grinding wheel spindle drive : 10.1 hp
Italy
Year of manufacture : 1994
Length of the working table : 57.1 in
Width of the working table : 17.7 in
Maximum rotary speed of the spindle : 2000 1/min
Maximum distance of the spindle from the table : 19.7 in
Length of the working table : 57.1 in
Width of the working table : 17.7 in
Maximum rotary speed of the spindle : 2000 1/min
Maximum distance of the spindle from the table : 19.7 in
Italy
Year of manufacture : 2001
CNC control model : Heidenhain Manuel Plus
Turning diameter over bed (max) : 41.3 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 157.5 in
CNC control model : Heidenhain Manuel Plus
Turning diameter over bed (max) : 41.3 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 157.5 in
Netherlands
Gelderland
Gelderland
Lathes TOS
Lathes TOS SN63B / 2000 [1]Lathes TOS SUS 63 X 8000 [1]
Milling Machines TOS
Milling Machines TOS Kurim Fcr 50 Nc [1]Milling Machines TOS FNGJ 32 [1]
CNC Milling Machines and Machining Centers TOS
CNC Milling Machines and Machining Centers TOS FGS 40-50 [1]CNC Milling Machines and Machining Centers TOS KURIM FGSQ 63 [1]
Grinding Machines TOS
Grinding Machines TOS HOSTIVAR BUT 63/4000 [1]Grinding Machines TOS BPH 300/1000 [1]
Boring Machines TOS
Boring Machines TOS W-100 A [2]Boring Machines TOS WHO 11 CNC [2]
Slotting Machines TOS
Slotting Machines TOS OHA 12 A [1]
