Plastics Injection Molding Machine BOY 50M

Category Injection Molding Machines BOY ›
Manufacturer BOY ›

ARCHIVED AD
Plastics Injection Molding Machine BOY 50M was manufactured by the machine manufacturer BOY. Machine BOY 50M was built in 1991 year.

General data

Location Poland
region Dolnośląskie
Year of manufacture 1991
Warranty Without warranty
Technical condition Good
Payment Before receipt
Transport The buyer organizes the transport at his own cost
Status A test can be performed

Technical parameters

Clamping force 55.1 short ton
Minimum distance between the plates for mounting the mold 9.8 in
Maximum distance between the plates for mounting the mold 23.6 in
Height of the plate for mounting the mold 19.7 in
Width of the plate for mounting the mold 19.7 in
Distance between the columns (horizontal) 12 in
Distance between the columns (vertical) 12 in
Power of the ejector 2 short ton
Length of the ejector stroke 4.7 in
Screw diameter 1.5 in
Maximum injection pressure 19725.1 psi
Oil tank capacity 66 US gallon
Total power demand 23.3 hp
Length of the stroke of the injection nozzle 8.3 in
Pressure force of the injection nozzle 7.4 short ton
Machine length 124.4 in
Machine width 43.1 in
Machine height 78.1 in
Weight of the injection molding machine 2.3 short ton

Equipment

Automatic loader for plastic granules
Dye feeder
Cores
Technical documentation
‹ previous DOOSAN MYNX 6500/50 TSUGAMI M08SYE-II BOY 50M NAPOMAR RPO 320x1600 ABB IRB6640-185/2 80 next ›