OKUMA
Year of manufacture : 1996
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum rotary speed of the main spindle : 3500 rpm
Length of the lathe : 177.2 in
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum rotary speed of the main spindle : 3500 rpm
Length of the lathe : 177.2 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1996
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Maximum rotary speed of the main spindle : 4500 rpm
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Maximum rotary speed of the main spindle : 4500 rpm
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2001
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1997
CNC control model : OKUMA OSP7000L
Maximum turning length (Z-axis) : 27.6 in
Maximum travel length in the X-axis : 6.6 in
Maximum rotary speed of the main spindle : 4500 rpm
CNC control model : OKUMA OSP7000L
Maximum turning length (Z-axis) : 27.6 in
Maximum travel length in the X-axis : 6.6 in
Maximum rotary speed of the main spindle : 4500 rpm
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1997
CNC control model : OKUMA OSP7000L
Maximum travel length in the X-axis : 6.6 in
C-axis synchronous
CNC control model : OKUMA OSP7000L
Maximum travel length in the X-axis : 6.6 in
C-axis synchronous
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1992
Diameter of the spindle bore : 1.7 in
Diameter of the spindle bore : 1.7 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2001
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1995
CNC control model : OSP7000L
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum travel length in the X-axis : 8.3 in
CNC control model : OSP7000L
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum travel length in the X-axis : 8.3 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2000
CNC control model : OKUMA OSP-U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : OKUMA OSP-U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
19046 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1989
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
8147 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1999
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Spain
Barcelona
Barcelona
Year of manufacture : 2003
CNC control model : OSP E 100 M
Length of the working table : 59.1 in
Width of the working table : 59.1 in
Power of the spindle drive : 40 hp
CNC control model : OSP E 100 M
Length of the working table : 59.1 in
Width of the working table : 59.1 in
Power of the spindle drive : 40 hp
United States
Colorado
Colorado
Year of manufacture : 2000
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 78.7 in
Turning diameter over bed (max) : 27.5 in
Turning diameter over cross slide (max) : 18.1 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 78.7 in
Turning diameter over bed (max) : 27.5 in
Turning diameter over cross slide (max) : 18.1 in
United States
Colorado
Colorado
Year of manufacture : 1995
CNC control model : OSP 700 M
Length of the working table : 39.5 in
Width of the working table : 20 in
Number of tools in the magazine : 20 pcs
CNC control model : OSP 700 M
Length of the working table : 39.5 in
Width of the working table : 20 in
Number of tools in the magazine : 20 pcs
United States
Colorado
Colorado
Year of manufacture : 2002
CNC control model : OSP E 100 M
Length of the working table : 48 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OSP E 100 M
Length of the working table : 48 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Colorado
Colorado
Year of manufacture : 1988
CNC control model : OSP 5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OSP 5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.8 in
United States
Colorado
Colorado
Year of manufacture : 1997
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 19.3 in
Turning diameter over cross slide (max) : 10.6 in
Maximum power of the main spindle : 20 hp
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 19.3 in
Turning diameter over cross slide (max) : 10.6 in
Maximum power of the main spindle : 20 hp
United States
Colorado
Colorado
Year of manufacture : 1989
CNC control model : OKUMA OSP
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 19.7 in
CNC control model : OKUMA OSP
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 19.7 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1998
CNC control model : OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
CNC control model : OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
United States
California
California
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
34500 USD
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
29500 USD
United States
California
California
Year of manufacture : 1996
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
37500 USD
United States
California
California
Year of manufacture : 1991
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
United States
New York
New York
Year of manufacture : 1994
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
CNC control model : OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
United States
South Carolina
South Carolina
Lathes OKUMA
Lathes OKUMA V80R [1]Lathes OKUMA SIMULTURN LU-300MY [1]
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LB 15 [4]CNC Lathes and Turning Centers OKUMA LB-25 [3]
Milling Machines OKUMA
Milling Machines OKUMA 5VS-NC [1]Milling Machines OKUMA 6VAE [1]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MC-V 4020 [6]CNC Milling Machines and Machining Centers OKUMA MX 45 VAE [4]
Grinding Machines OKUMA
Grinding Machines OKUMA GP-26 T X 65 [1]Grinding Machines OKUMA GI-5 N [1]
