OKUMA / page 4
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 5000 1/min
CNC control model : OKUMA OSP 7000 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 5000 1/min
United States
California
California
Year of manufacture : 2004
CNC control model : OKUMA OSP 700
Length of the working table : 35 in
Width of the working table : 16 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP 700
Length of the working table : 35 in
Width of the working table : 16 in
Maximum table load (evenly distributed) : 1500 lb
United States
California
California
Year of manufacture : 2006
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
United States
Arkansas
Arkansas
Year of manufacture : 2005
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 20.8 in
Maximum power of the main spindle : 10 hp
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 20.8 in
Maximum power of the main spindle : 10 hp
United States
California
California
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 47.2 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP 700 M
Length of the working table : 47.2 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1500 lb
19500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
United States
Georgia
Georgia
Year of manufacture : 2012
CNC control model : OKUMA OSP-200 L
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 26.4 in
Turning diameter over cross slide (max) : 18.9 in
CNC control model : OKUMA OSP-200 L
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 26.4 in
Turning diameter over cross slide (max) : 18.9 in
United States
Florida
Florida
Year of manufacture : 2013
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 11.8 in
United States
Florida
Florida
Year of manufacture : 2008
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 15.8 in
Maximum power of the main spindle : 15 hp
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 15.8 in
Maximum power of the main spindle : 15 hp
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Florida
Florida
Year of manufacture : 2005
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 68.9 in
Turning diameter over bed (max) : 40.6 in
Turning diameter over cross slide (max) : 25.6 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 68.9 in
Turning diameter over bed (max) : 40.6 in
Turning diameter over cross slide (max) : 25.6 in
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 2008
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2013
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 39.4 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 39.4 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 2011
CNC control model : FANUC 31-A
Diameter of the table : 35.8 in
Maximum turning diameter : 31.5 in
Minimum table rotary speed : 13 rpm
CNC control model : FANUC 31-A
Diameter of the table : 35.8 in
Maximum turning diameter : 31.5 in
Minimum table rotary speed : 13 rpm
United States
Florida
Florida
Year of manufacture : 2007
CNC control model : OKUMA OSP 200 M
Length of the working table : 51.2 in
Width of the working table : 22 in
Maximum table load (evenly distributed) : 1984.2 lb
CNC control model : OKUMA OSP 200 M
Length of the working table : 51.2 in
Width of the working table : 22 in
Maximum table load (evenly distributed) : 1984.2 lb
France
Isère
Isère
Year of manufacture : 2003
CNC control model : OKUMA OSP
Length of the working table : 59.1 in
Width of the working table : 149.6 in
Maximum table load (evenly distributed) : 35200 lb
CNC control model : OKUMA OSP
Length of the working table : 59.1 in
Width of the working table : 149.6 in
Maximum table load (evenly distributed) : 35200 lb
Canada
Year of manufacture : 2000
CNC control model : OKUMA OSP-U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OKUMA OSP-U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
Canada
Year of manufacture : 2005
CNC control model : OKUMA OSP-E 100 M
Length of the working table : 51.2 in
Width of the working table : 22 in
Maximum table load (evenly distributed) : 1984.2 lb
CNC control model : OKUMA OSP-E 100 M
Length of the working table : 51.2 in
Width of the working table : 22 in
Maximum table load (evenly distributed) : 1984.2 lb
Germany
Bayern
Bayern
Year of manufacture : 2007
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 28 in
Maximum power of the main spindle (turning) : 29.5 hp
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 28 in
Maximum power of the main spindle (turning) : 29.5 hp
Germany
Bayern
Bayern
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA MACTURN 250 W [2]CNC Lathes and Turning Centers OKUMA LC 20 [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MX-45 VAE [3]CNC Milling Machines and Machining Centers OKUMA MX-50 HB [3]
