OKUMA / page 3
Year of manufacture : 1995
CNC control model : OSP 700 M
Length of the working table : 39.5 in
Width of the working table : 20 in
Number of tools in the magazine : 20 pcs
CNC control model : OSP 700 M
Length of the working table : 39.5 in
Width of the working table : 20 in
Number of tools in the magazine : 20 pcs
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : OKUMA P 2000 L
Maximum turning length (Z-axis) : 29.5 in
Turning diameter over cross slide (max) : 23.6 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : OKUMA P 2000 L
Maximum turning length (Z-axis) : 29.5 in
Turning diameter over cross slide (max) : 23.6 in
Maximum travel length in the X-axis : 19.7 in
United States
Colorado
Colorado
Year of manufacture : 1997
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 19.3 in
Turning diameter over cross slide (max) : 10.6 in
Maximum power of the main spindle : 20 hp
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 19.3 in
Turning diameter over cross slide (max) : 10.6 in
Maximum power of the main spindle : 20 hp
United States
Colorado
Colorado
Year of manufacture : 2005
CNC control model : OSP E 100 L
Maximum turning length (Z-axis) : 56.7 in
Maximum turning diameter : 29.9 in
Maximum travel length in the X-axis : 18.7 in
CNC control model : OSP E 100 L
Maximum turning length (Z-axis) : 56.7 in
Maximum turning diameter : 29.9 in
Maximum travel length in the X-axis : 18.7 in
United States
Colorado
Colorado
Year of manufacture : 2004
CNC control model : OSP E 100 L
Maximum turning length (Z-axis) : 56.7 in
Maximum turning diameter : 20.9 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : OSP E 100 L
Maximum turning length (Z-axis) : 56.7 in
Maximum turning diameter : 20.9 in
Maximum travel length in the X-axis : 19.7 in
United States
Colorado
Colorado
Year of manufacture : 1988
CNC control model : OSP 5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OSP 5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.8 in
United States
Colorado
Colorado
Year of manufacture : 1989
CNC control model : OKUMA OSP
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 19.7 in
CNC control model : OKUMA OSP
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 19.7 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1998
CNC control model : OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
CNC control model : OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
29500 USD
United States
California
California
Year of manufacture : 2007
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
225000 USD
United States
California
California
Year of manufacture : 1996
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
37500 USD
United States
California
California
Year of manufacture : 2009
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 37.2 in
Turning diameter over bed (max) : 24.8 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 37.2 in
Turning diameter over bed (max) : 24.8 in
Maximum travel length in the X-axis : 22.8 in
184000 USD
United States
California
California
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
34500 USD
United States
California
California
Year of manufacture : 1991
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
United States
New York
New York
Year of manufacture : 2004
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 21.7 in
Maximum feed rate in X-axis : 1181 in/min
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 21.7 in
Maximum feed rate in X-axis : 1181 in/min
United States
New York
New York
Year of manufacture : 1994
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
CNC control model : OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
United States
South Carolina
South Carolina
Year of manufacture : 2010
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 1997
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 2001
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2002
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OSP U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OSP U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA MACTURN 250 W [2]CNC Lathes and Turning Centers OKUMA LB 15 II [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MA-40 HA [3]CNC Milling Machines and Machining Centers OKUMA MX-60 HB [3]
