OKUMA / page 2
Year of manufacture : 1998
CNC control model : OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
CNC control model : OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
United States
California
California
Year of manufacture : 1996
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
37500 USD
United States
California
California
Year of manufacture : 2007
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
225000 USD
United States
California
California
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
34500 USD
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
29500 USD
United States
California
California
Year of manufacture : 2004
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 21.7 in
Maximum feed rate in X-axis : 1181 in/min
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 21.7 in
Maximum feed rate in X-axis : 1181 in/min
United States
New York
New York
Year of manufacture : 1994
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
CNC control model : OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OSP U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OSP U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
South Carolina
South Carolina
Year of manufacture : 1997
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 2001
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2002
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Colorado
Colorado
Year of manufacture : 1997
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1997
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
France
Rhône
Rhône
Year of manufacture : 2003
CNC control model : OSP U 100 M
Length of the working table : 29.9 in
Width of the working table : 18.1 in
Number of tools in the magazine : 20 pcs
CNC control model : OSP U 100 M
Length of the working table : 29.9 in
Width of the working table : 18.1 in
Number of tools in the magazine : 20 pcs
Italy
Year of manufacture : 1998
Number of tools in the magazine : 154 pcs
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 24 in
Number of tools in the magazine : 154 pcs
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 24 in
Italy
Year of manufacture : 2000
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Number of tools in the magazine : 20 pcs
Minimum rotary speed of the vertical spindle : 50 1/min
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Number of tools in the magazine : 20 pcs
Minimum rotary speed of the vertical spindle : 50 1/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1997
CNC control model : OKUMA OSP U 10 N
Length of the working table : 39.4 in
Width of the working table : 16.9 in
Maximum table load (evenly distributed) : 1322.8 lb
CNC control model : OKUMA OSP U 10 N
Length of the working table : 39.4 in
Width of the working table : 16.9 in
Maximum table load (evenly distributed) : 1322.8 lb
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 27.6 in
Turning diameter over bed (max) : 13.8 in
Number of spindles : 2 pcs
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 27.6 in
Turning diameter over bed (max) : 13.8 in
Number of spindles : 2 pcs
Germany
Year of manufacture : 1999
Length of the working table : 39.4 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 1102.3 lb
Number of tools in the magazine : 32 pcs
Length of the working table : 39.4 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 1102.3 lb
Number of tools in the magazine : 32 pcs
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 2007
Length of the working table : 55.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 20 hp
Number of CNC controlled axles : 4 pcs
Length of the working table : 55.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 20 hp
Number of CNC controlled axles : 4 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 2002
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
United States
Wisconsin
Wisconsin
Lathes OKUMA
Lathes OKUMA LS 450x1250 [1]CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LB-25 [3]CNC Lathes and Turning Centers OKUMA CROWN L 1060 [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MA 50 HB [4]CNC Milling Machines and Machining Centers OKUMA MX 45 VAE [4]
