OKK
Year of manufacture : 2002
CNC control model : FANUC Series 16i-M
Length of the working table : 41.3 in
Width of the working table : 22.1 in
Number of tools in the magazine : 30 pcs
CNC control model : FANUC Series 16i-M
Length of the working table : 41.3 in
Width of the working table : 22.1 in
Number of tools in the magazine : 30 pcs
29292 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1995
CNC control model : FANUC 18M
CNC control model : FANUC 18M
Italy
Year of manufacture : 1999
CNC control model : FANUC 16-M
Length of the working table : 24 in
Width of the working table : 24 in
Maximum table load (evenly distributed) : 1543 lb
CNC control model : FANUC 16-M
Length of the working table : 24 in
Width of the working table : 24 in
Maximum table load (evenly distributed) : 1543 lb
United States
Wisconsin
Wisconsin
Year of manufacture : 1998
CNC control model : OKK NEOMATIC CONTROL
Length of the working table : 48 in
Width of the working table : 22 in
Power of the spindle drive : 25 hp
CNC control model : OKK NEOMATIC CONTROL
Length of the working table : 48 in
Width of the working table : 22 in
Power of the spindle drive : 25 hp
United States
Wisconsin
Wisconsin
Year of manufacture : 1992
CNC control model : MELDAS 500 M
Length of the working table : 51 in
Width of the working table : 22 in
Maximum table load (evenly distributed) : 3300 lb
CNC control model : MELDAS 500 M
Length of the working table : 51 in
Width of the working table : 22 in
Maximum table load (evenly distributed) : 3300 lb
United States
Wisconsin
Wisconsin
Year of manufacture : 2010
CNC control model : FANUC 180is-MB
Length of the working table : 61 in
Width of the working table : 29.1 in
Maximum table load (evenly distributed) : 3303 lb
CNC control model : FANUC 180is-MB
Length of the working table : 61 in
Width of the working table : 29.1 in
Maximum table load (evenly distributed) : 3303 lb
174500 USD
United States
California
California
Year of manufacture : 1999
CNC control model : OKK NEOMATIC
Length of the working table : 24 in
Width of the working table : 24 in
Maximum table load (evenly distributed) : 1543 lb
CNC control model : OKK NEOMATIC
Length of the working table : 24 in
Width of the working table : 24 in
Maximum table load (evenly distributed) : 1543 lb
United States
New York
New York
Year of manufacture : 1999
CNC control model : FANUC 16i-MA
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 1543 lb
CNC control model : FANUC 16i-MA
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 1543 lb
United States
New York
New York
Year of manufacture : 2007
CNC control model : FANUC 310 iS A
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 881 lb
CNC control model : FANUC 310 iS A
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 881 lb
United States
New York
New York
Year of manufacture : 2001
CNC control model : MITSUBISHI NEOMATIC
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 991 lb
CNC control model : MITSUBISHI NEOMATIC
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 991 lb
United States
New York
New York
Year of manufacture : 1996
CNC control model : OKK CNC CONTROL
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 30 hp
CNC control model : OKK CNC CONTROL
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 30 hp
United States
New York
New York
Year of manufacture : 1984
Length of the working table : 51.5 in
Width of the working table : 11.9 in
Power of the spindle drive : 7.5 hp
Minimum rotary speed of the spindle : 60 1/min
Length of the working table : 51.5 in
Width of the working table : 11.9 in
Power of the spindle drive : 7.5 hp
Minimum rotary speed of the spindle : 60 1/min
5950 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1982
Length of the working table : 14.3 in
Width of the working table : 65 in
Power of the spindle drive : 10 hp
Number of rotary speeds of the spindle : 12 pcs
Length of the working table : 14.3 in
Width of the working table : 65 in
Power of the spindle drive : 10 hp
Number of rotary speeds of the spindle : 12 pcs
11500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2004
CNC control model : FANUC 160iS-MB
Length of the working table : 41.3 in
Width of the working table : 22.1 in
Maximum table load (evenly distributed) : 1764 lb
CNC control model : FANUC 160iS-MB
Length of the working table : 41.3 in
Width of the working table : 22.1 in
Maximum table load (evenly distributed) : 1764 lb
United States
South Carolina
South Carolina
Year of manufacture : 2001
CNC control model : FANUC 16i-M
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 5512 lb
CNC control model : FANUC 16i-M
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 5512 lb
United States
South Carolina
South Carolina
Year of manufacture : 1997
CNC control model : FANUC 18 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : FANUC 18 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
South Carolina
South Carolina
Year of manufacture : 1989
CNC control model : FANUC 11 M
Length of the working table : 63 in
Width of the working table : 30 in
Maximum table load (evenly distributed) : 3500 lb
CNC control model : FANUC 11 M
Length of the working table : 63 in
Width of the working table : 30 in
Maximum table load (evenly distributed) : 3500 lb
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : FANUC 16i-M
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2424 lb
CNC control model : FANUC 16i-M
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2424 lb
United States
South Carolina
South Carolina
Year of manufacture : 1988
CNC control model : FANUC 11 M
Length of the working table : 50 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 11 M
Length of the working table : 50 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 2200 lb
United States
South Carolina
South Carolina
Year of manufacture : 1993
CNC control model : MITSUBISHI CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : MITSUBISHI CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
United States
South Carolina
South Carolina
Year of manufacture : 1990
CNC control model : FANUC
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 10.1 hp
CNC control model : FANUC
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 10.1 hp
Germany
Hessen
Hessen
Year of manufacture : 1990
CNC control model : FANUC OM
Length of the working table : 36.2 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1102.3 lb
CNC control model : FANUC OM
Length of the working table : 36.2 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1102.3 lb
Germany
Year of manufacture : 1997
CNC control model : MITSUBISHI CNC CONTROL
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Number of tools in the magazine : 40 pcs
CNC control model : MITSUBISHI CNC CONTROL
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Number of tools in the magazine : 40 pcs
United States
California
California
Year of manufacture : 1991
CNC control model : MITSUBISHI 300
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 10 hp
CNC control model : MITSUBISHI 300
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 10 hp
United States
California
California
Year of manufacture : 1997
CNC control model : OKK NEOMATIC
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OKK NEOMATIC
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 880 lb
United States
California
California
Year of manufacture : 2004
CNC control model : FANUC 21i
Length of the working table : 19.7 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
CNC control model : FANUC 21i
Length of the working table : 19.7 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
United States
California
California
Year of manufacture : 1997
CNC control model : OKK NEOMATIC
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 30 hp
CNC control model : OKK NEOMATIC
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 1998
CNC control model : OKK CNC CONTROL
Length of the working table : 48 in
Width of the working table : 22 in
Power of the spindle drive : 30 hp
CNC control model : OKK CNC CONTROL
Length of the working table : 48 in
Width of the working table : 22 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 1980
CNC control model : MITSUBISHI CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
CNC control model : MITSUBISHI CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : MITSUBISHI 635
Maximum rotary speed of the vertical spindle : 8000 1/min
Travel length X-axis (mechanical feed) : 60 in
Travel length Y-axis (mechanical feed) : 30 in
CNC control model : MITSUBISHI 635
Maximum rotary speed of the vertical spindle : 8000 1/min
Travel length X-axis (mechanical feed) : 60 in
Travel length Y-axis (mechanical feed) : 30 in
United States
California
California
Milling Machines OKK
Milling Machines OKK MH-3V [1]Milling Machines OKK MH-2V [1]
CNC Milling Machines and Machining Centers OKK
CNC Milling Machines and Machining Centers OKK HM-60 [3]CNC Milling Machines and Machining Centers OKK HM-40 [3]
