OKAMOTO
Year of manufacture : 2021
Length of the working table : 17.7 in
Width of the working table : 5.9 in
Maximum table load (evenly distributed) : 264.6 lb
Length of the working table : 17.7 in
Width of the working table : 5.9 in
Maximum table load (evenly distributed) : 264.6 lb
Netherlands
Gelderland
Gelderland
Year of manufacture : 1980
Maximal module : 0.314961 in
Minimal module : 0.019685 in
Maximum diameter of the gear wheel : 15.7 in
Machine weight : 9.9 short ton
Maximal module : 0.314961 in
Minimal module : 0.019685 in
Maximum diameter of the gear wheel : 15.7 in
Machine weight : 9.9 short ton
Poland
Year of manufacture : 2010
Length of the working table : 21.7 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.4 in
Maximum table load (evenly distributed) : 440.9 lb
Length of the working table : 21.7 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.4 in
Maximum table load (evenly distributed) : 440.9 lb
36286 USD
Russia
Приморский край
Приморский край
Year of manufacture : 1985
Machine height : 102 in
Machine length : 220 in
Machine width : 150 in
Machine weight : 10 short ton
Machine height : 102 in
Machine length : 220 in
Machine width : 150 in
Machine weight : 10 short ton
Mexico
Nuevo León
Nuevo León
Year of manufacture : 1985
CNC control model : Fanuc FANUC 16i-M CNC 2004
Length of the working table : 118 in
Width of the working table : 31.5 in
Number of CNC controlled axles : 4 pcs
CNC control model : Fanuc FANUC 16i-M CNC 2004
Length of the working table : 118 in
Width of the working table : 31.5 in
Number of CNC controlled axles : 4 pcs
35000 USD
United States
Year of manufacture : 1990
Length of the working table : 24 in
Width of the working table : 12 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Maximum rotary speed of the spindle : 1800 1/min
Length of the working table : 24 in
Width of the working table : 12 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Maximum rotary speed of the spindle : 1800 1/min
United States
Illinois
Illinois
Year of manufacture : 1990
Length of the working table : 24 in
Width of the working table : 12 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Minimum longitudinal feed rate (Z-axis) : 12 in/min
Length of the working table : 24 in
Width of the working table : 12 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Minimum longitudinal feed rate (Z-axis) : 12 in/min
United States
Colorado
Colorado
Year of manufacture : 1990
Length of the working table : 79 in
Width of the working table : 20 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 23.4 in
Power of the spindle drive : 10 hp
Length of the working table : 79 in
Width of the working table : 20 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 23.4 in
Power of the spindle drive : 10 hp
United States
Wisconsin
Wisconsin
Year of manufacture : 1989
Length of the working table : 79 in
Width of the working table : 20 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 23.4 in
Power of the spindle drive : 10 hp
Length of the working table : 79 in
Width of the working table : 20 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 23.4 in
Power of the spindle drive : 10 hp
United States
Minnesota
Minnesota
Year of manufacture : 1989
Length of the working table : 79 in
Width of the working table : 20 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 23.4 in
Power of the spindle drive : 10 hp
Length of the working table : 79 in
Width of the working table : 20 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 23.4 in
Power of the spindle drive : 10 hp
United States
Minnesota
Minnesota
Year of manufacture : 1998
Length of the working table : 18 in
Width of the working table : 6 in
Maximum table load (evenly distributed) : 264 lb
Permanent magnetic chuck
Length of the working table : 18 in
Width of the working table : 6 in
Maximum table load (evenly distributed) : 264 lb
Permanent magnetic chuck
United States
New York
New York
Year of manufacture : 1990
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Power of the spindle drive : 5 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 12 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 24 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Power of the spindle drive : 5 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 12 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 24 in
United States
South Carolina
South Carolina
Year of manufacture : 1992
Length of the working table : 12 in
Width of the working table : 24 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.6 in
Power of the spindle drive : 5 hp
Length of the working table : 12 in
Width of the working table : 24 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.6 in
Power of the spindle drive : 5 hp
United States
California
California
Year of manufacture : 1986
Length of the working table : 23.8 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 12 in
Power of the spindle drive : 5 hp
Length of the working table : 23.8 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 12 in
Power of the spindle drive : 5 hp
12500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1999
CNC control model : FANUC 21 GA
Maximum length of the grinding (shaft) : 23.6 in
Maximum diameter of the grinding (shaft) : 12.5 in
Center height : 6.3 in
CNC control model : FANUC 21 GA
Maximum length of the grinding (shaft) : 23.6 in
Maximum diameter of the grinding (shaft) : 12.5 in
Center height : 6.3 in
United States
Michigan
Michigan
Year of manufacture : 1983
Length of the working table : 24 in
Width of the working table : 24 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15 in
Power of the spindle drive : 10 hp
Length of the working table : 24 in
Width of the working table : 24 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15 in
Power of the spindle drive : 10 hp
United States
Michigan
Michigan
Year of manufacture : 1988
Length of the working table : 18 in
Width of the working table : 6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 12 in
Maximum table load (evenly distributed) : 1500 lb
Length of the working table : 18 in
Width of the working table : 6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 12 in
Maximum table load (evenly distributed) : 1500 lb
United States
Michigan
Michigan
Year of manufacture : 1979
Power of the spindle drive : 10 hp
Minimum longitudinal feed rate (Z-axis) : 12 in/min
Maximum longitudinal feed rate (Z-axis) : 1200 in/min
Maximum length of grinding (without the grinding wheel output) X-axis : 80.7 in
Power of the spindle drive : 10 hp
Minimum longitudinal feed rate (Z-axis) : 12 in/min
Maximum longitudinal feed rate (Z-axis) : 1200 in/min
Maximum length of grinding (without the grinding wheel output) X-axis : 80.7 in
United States
Illinois
Illinois
Year of manufacture : 1998
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 5 hp
Maximum distance from the table to the spindle axis : 21.5 in
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 5 hp
Maximum distance from the table to the spindle axis : 21.5 in
United States
Illinois
Illinois
Year of manufacture : 1988
Power of the grinding wheel spindle drive : 3 hp
Maximum rotary speed the grinding wheel spindle : 850 1/min
Power of the workpiece spindle drive : 2 hp
Machine height : 69 in
Power of the grinding wheel spindle drive : 3 hp
Maximum rotary speed the grinding wheel spindle : 850 1/min
Power of the workpiece spindle drive : 2 hp
Machine height : 69 in
United States
Illinois
Illinois
Year of manufacture : 2000
CNC control model : OKAMOTO PRECISION CNC CONTRO
Maximum length of the grinding (shaft) : 23.6 in
Maximum diameter of the grinding (shaft) : 12.6 in
Maximum weight of the shaft between the centers : 330 lb
CNC control model : OKAMOTO PRECISION CNC CONTRO
Maximum length of the grinding (shaft) : 23.6 in
Maximum diameter of the grinding (shaft) : 12.6 in
Maximum weight of the shaft between the centers : 330 lb
United States
Illinois
Illinois
Year of manufacture : 2000
CNC control model : OKAMOTO CNC CONTROL
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Maximum table load (evenly distributed) : 925 lb
Power of the spindle drive : 5 hp
CNC control model : OKAMOTO CNC CONTROL
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.7 in
Maximum table load (evenly distributed) : 925 lb
Power of the spindle drive : 5 hp
United States
Illinois
Illinois
CNC Milling Machines and Machining Centers OKAMOTO
CNC Milling Machines and Machining Centers OKAMOTO HMC-3000 [1]Grinding Machines OKAMOTO
Grinding Machines OKAMOTO PSG 205-DX [2]Grinding Machines OKAMOTO 124 N ACCUGAR [2]
