MORI SEIKI / page 3
Year of manufacture : 1997
Length of the working table : 29.5 in
Width of the working table : 21.7 in
Number of tools in the magazine : 40 pcs
Maximum rotary speed of the vertical spindle : 8000 1/min
Length of the working table : 29.5 in
Width of the working table : 21.7 in
Number of tools in the magazine : 40 pcs
Maximum rotary speed of the vertical spindle : 8000 1/min
Italy
Year of manufacture : 2003
Power of the spindle drive : 49.6 hp
Number of tools in the magazine : 150 pcs
Maximum rotary speed of the spindle : 6000 1/min
Travel length X-axis (mechanical feed) : 42.5 in
Power of the spindle drive : 49.6 hp
Number of tools in the magazine : 150 pcs
Maximum rotary speed of the spindle : 6000 1/min
Travel length X-axis (mechanical feed) : 42.5 in
Italy
Year of manufacture : 2001
CNC control model : FANUC MSG 501
Maximum turning length (Z-axis) : 51.2 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 11.8 in
CNC control model : FANUC MSG 501
Maximum turning length (Z-axis) : 51.2 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 11.8 in
220930 USD
Italy
Year of manufacture : 2000
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 22 in
Travel length Z-axis (mechanical feed) : 20.1 in
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 22 in
Travel length Z-axis (mechanical feed) : 20.1 in
Italy
Year of manufacture : 1999
CNC control model : FANUC MSC-502 16i-MA
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : FANUC MSC-502 16i-MA
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
New York
New York
Year of manufacture : 2001
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 31.5 in
Turning diameter over bed (max) : 28.1 in
Turning diameter over cross slide (max) : 19.7 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 31.5 in
Turning diameter over bed (max) : 28.1 in
Turning diameter over cross slide (max) : 19.7 in
United States
New York
New York
Year of manufacture : 1999
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 18.5 in
Turning diameter over bed (max) : 20.5 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 18.5 in
Turning diameter over bed (max) : 20.5 in
Maximum travel length in the X-axis : 10.2 in
United States
New York
New York
Year of manufacture : 1985
CNC control model : FANUC 6 M
Length of the working table : 55.1 in
Width of the working table : 19.7 in
Maximum rotary speed of the vertical spindle : 4000 1/min
CNC control model : FANUC 6 M
Length of the working table : 55.1 in
Width of the working table : 19.7 in
Maximum rotary speed of the vertical spindle : 4000 1/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1995
CNC control model : FANUC
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 1.7 in
Maximum power of the main spindle : 10.1 hp
CNC control model : FANUC
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 1.7 in
Maximum power of the main spindle : 10.1 hp
Germany
Rheinland-Pfalz
Rheinland-Pfalz
Year of manufacture : 1999
CNC control model : Fanuc
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 6.7 in
Diameter of the spindle bore : 1.8 in
CNC control model : Fanuc
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 6.7 in
Diameter of the spindle bore : 1.8 in
Germany
Rheinland-Pfalz
Rheinland-Pfalz
Year of manufacture : 1999
CNC control model : Fanuc MSC 501
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 6.7 in
Maximum rotary speed of the main spindle : 5000 rpm
CNC control model : Fanuc MSC 501
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 6.7 in
Maximum rotary speed of the main spindle : 5000 rpm
Germany
Rheinland-Pfalz
Rheinland-Pfalz
Year of manufacture : 1995
Number of spindles : 2 pcs
Number of tool turrets : 2 pcs
C-axis indexed
Number of spindles : 2 pcs
Number of tool turrets : 2 pcs
C-axis indexed
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1999
CNC control model : FANUC MF-M6
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC MF-M6
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Maximum table load (evenly distributed) : 1540 lb
United States
Wisconsin
Wisconsin
Year of manufacture : 2001
CNC control model : FANUC F 31i-A
Maximum turning length (Z-axis) : 60.7 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 29.5 in
CNC control model : FANUC F 31i-A
Maximum turning length (Z-axis) : 60.7 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 29.5 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1999
CNC control model : FANUC 16 M
Length of the working table : 24 in
Width of the working table : 24 in
Number of tools in the magazine : 180 pcs
CNC control model : FANUC 16 M
Length of the working table : 24 in
Width of the working table : 24 in
Number of tools in the magazine : 180 pcs
United States
California
California
Year of manufacture : 1996
CNC control model : FANUC 16 CONTROL
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Number of tools in the magazine : 40 pcs
CNC control model : FANUC 16 CONTROL
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Number of tools in the magazine : 40 pcs
United States
California
California
Year of manufacture : 1995
CNC control model : FANUC MSC-516
Length of the working table : 43.3 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC MSC-516
Length of the working table : 43.3 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 1540 lb
United States
California
California
Year of manufacture : 2000
CNC control model : FANUC 18 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 18 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
United States
California
California
Year of manufacture : 1994
CNC control model : FANUC 16 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 16 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
United States
California
California
Year of manufacture : 1989
CNC control model : YASNAC MX 3
Length of the working table : 35.4 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 660 lb
CNC control model : YASNAC MX 3
Length of the working table : 35.4 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 660 lb
United States
California
California
Year of manufacture : 1984
CNC control model : FANUC 6 M
Length of the working table : 44 in
Width of the working table : 18 in
Power of the spindle drive : 5.5 hp
CNC control model : FANUC 6 M
Length of the working table : 44 in
Width of the working table : 18 in
Power of the spindle drive : 5.5 hp
United States
California
California
Year of manufacture : 1999
CNC control model : FANUC MF-M 6
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC MF-M 6
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Maximum table load (evenly distributed) : 1540 lb
United States
California
California
Year of manufacture : 1985
CNC control model : FANUC 6 M
CNC control model : FANUC 6 M
United States
California
California
Year of manufacture : 1993
CNC control model : FANUC MF-M 7
Length of the working table : 24.8 in
Width of the working table : 15.7 in
Power of the spindle drive : 7.5 hp
CNC control model : FANUC MF-M 7
Length of the working table : 24.8 in
Width of the working table : 15.7 in
Power of the spindle drive : 7.5 hp
United States
California
California
Year of manufacture : 1996
CNC control model : FANUC 16 T
Maximum turning length (Z-axis) : 45.3 in
Maximum turning diameter : 46.9 in
Maximum travel length in the X-axis : 17.7 in
CNC control model : FANUC 16 T
Maximum turning length (Z-axis) : 45.3 in
Maximum turning diameter : 46.9 in
Maximum travel length in the X-axis : 17.7 in
United States
California
California
Year of manufacture : 2002
CNC control model : MORI SEIKI MSG-803
Maximum turning length (Z-axis) : 18.8 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 16.1 in
CNC control model : MORI SEIKI MSG-803
Maximum turning length (Z-axis) : 18.8 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 16.1 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2000
CNC control model : MORI SEIKI MSC-501
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 17.9 in
CNC control model : MORI SEIKI MSC-501
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 17.9 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1990
CNC control model : YASNAC CNC CONTROL
Maximum turning length (Z-axis) : 8.3 in
Turning diameter over bed (max) : 7.5 in
Turning diameter over cross slide (max) : 5.9 in
CNC control model : YASNAC CNC CONTROL
Maximum turning length (Z-axis) : 8.3 in
Turning diameter over bed (max) : 7.5 in
Turning diameter over cross slide (max) : 5.9 in
United States
Florida
Florida
Year of manufacture : 1997
CNC control model : MORIC MSG-803
Maximum turning length (Z-axis) : 11.4 in
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.1 in
CNC control model : MORIC MSG-803
Maximum turning length (Z-axis) : 11.4 in
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.1 in
United States
Florida
Florida
Year of manufacture : 1997
CNC control model : YASNAC CNC CONTROL
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.2 in
Maximum power of the main spindle : 10 hp
CNC control model : YASNAC CNC CONTROL
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.2 in
Maximum power of the main spindle : 10 hp
United States
Florida
Florida
Lathes MORI SEIKI
Lathes MORI SEIKI DuraTurn 2550 [1]Lathes MORI SEIKI NL2500-700 [1]
CNC Lathes and Turning Centers MORI SEIKI
CNC Lathes and Turning Centers MORI SEIKI SL 65 A [2]CNC Lathes and Turning Centers MORI SEIKI NTX 1000 SZM [2]
CNC Milling Machines and Machining Centers MORI SEIKI
CNC Milling Machines and Machining Centers MORI SEIKI SH-400 [3]CNC Milling Machines and Machining Centers MORI SEIKI MH-50 [2]
