Jig borer STANKOIMPORT 2B440
Jig borer STANKOIMPORT 2B440 was manufactured by the machine manufacturer STANKOIMPORT. Machine STANKOIMPORT 2B440 was built in 1965 year.
General data | |
|---|---|
| Location | Czech Republic |
| region | Zlínský kraj |
| Year of manufacture | 1965 |
| Warranty | Without warranty |
| Technical condition | Good |
| Transport | The buyer organizes the transport at his own cost |
| Status | Machine unplugged |
Technical parameters | |
|---|---|
| Length of the working table | 27.6 in |
| Width of the working table | 15.7 in |
| Minimum rotary speed of the spindle | 30 1/min |
| Maximum rotary speed of the spindle | 1600 1/min |
| Maximum table load (evenly distributed) | 1763.7 lb |
| Travel length X-axis (mechanical feed) | 27.6 in |
| Travel length Y-axis (mechanical feed) | 15.7 in |
| Travel length Z-axis (mechanical feed) | 19.7 in |
| Accuracy of positioning | 0.000039 in |
| Machine height | 94.5 in |
| Machine length | 78.7 in |
| Machine width | 70.9 in |
Equipment | |
|---|---|
| Digital readouts | |
| Inverter | |
| Belt transmission of the spindle drive | |
| Automatic travel of the quill | |
| Automatic travel of the headstock | |
| The working table enables feed in the X and Y axis | |
| Rapid feed of the table | |
| Lighting | |
| Technical documentation | |
