HARDINGE
Year of manufacture : 2006
CNC control model : Fanuc Series Oi-TC
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 9.8 in
Diameter of the spindle bore : 2 in
CNC control model : Fanuc Series Oi-TC
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 9.8 in
Diameter of the spindle bore : 2 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2003
CNC control model : FANUC 0 iTB
Maximum turning length (Z-axis) : 15 in
Turning diameter over bed (max) : 11.2 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : FANUC 0 iTB
Maximum turning length (Z-axis) : 15 in
Turning diameter over bed (max) : 11.2 in
Maximum feed rate in X-axis : 1181.1 in/min
25267 USD
United Kingdom
Kent
Kent
Year of manufacture : 2005
CNC control model : SIEMENS Sinumerik 810D
Length of the working table : 44.1 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1543.2 lb
CNC control model : SIEMENS Sinumerik 810D
Length of the working table : 44.1 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1543.2 lb
19619 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2005
CNC control model : FANUC 0i - mb
Length of the working table : 29.5 in
Width of the working table : 20.1 in
Power of the spindle drive : 14.7 hp
CNC control model : FANUC 0i - mb
Length of the working table : 29.5 in
Width of the working table : 20.1 in
Power of the spindle drive : 14.7 hp
Italy
Year of manufacture : 1995
Bar feeder
Subspindle
Technical documentation
CE Declaration
Bar feeder
Subspindle
Technical documentation
CE Declaration
18023 USD
Italy
Year of manufacture : 2002
CNC control model : FANUC 18-TB
Maximum turning length (Z-axis) : 13.9 in
Turning diameter over cross slide (max) : 11.2 in
Maximum feed rate in X-axis : 787.4 in/min
CNC control model : FANUC 18-TB
Maximum turning length (Z-axis) : 13.9 in
Turning diameter over cross slide (max) : 11.2 in
Maximum feed rate in X-axis : 787.4 in/min
20349 USD
France
Bas-Rhin
Bas-Rhin
Year of manufacture : 2001
CNC control model : Control CNC FANUC GE SERIES 18i-T
CNC control model : Control CNC FANUC GE SERIES 18i-T
Spain
Guipúzcoa
Guipúzcoa
Year of manufacture : 1998
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
United States
Colorado
Colorado
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC 0i-MB
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
United States
Colorado
Colorado
Year of manufacture : 1992
CNC control model : SIEMENS SINUMERIK 810 T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
CNC control model : SIEMENS SINUMERIK 810 T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1996
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1969
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 9 in
Turning diameter over cross slide (max) : 4.5 in
Minimum rotary speed of the spindle : 170 1/min
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 9 in
Turning diameter over cross slide (max) : 4.5 in
Minimum rotary speed of the spindle : 170 1/min
United States
Wisconsin
Wisconsin
Year of manufacture : 1977
Length of the working table : 25 in
Width of the working table : 6.5 in
Number of rotary speeds of the spindle : 8 pcs
Minimum rotary speed of the spindle : 11 1/min
Length of the working table : 25 in
Width of the working table : 6.5 in
Number of rotary speeds of the spindle : 8 pcs
Minimum rotary speed of the spindle : 11 1/min
United States
Minnesota
Minnesota
Year of manufacture : 1999
CNC control model : FANUC O-MB
Length of the working table : 43.1 in
Width of the working table : 16.7 in
Power of the spindle drive : 15 hp
CNC control model : FANUC O-MB
Length of the working table : 43.1 in
Width of the working table : 16.7 in
Power of the spindle drive : 15 hp
United States
New York
New York
Year of manufacture : 1998
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 31 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 10 in
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 31 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 10 in
United States
New York
New York
Year of manufacture : 1998
Maximum turning length (Z-axis) : 11.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
Maximum turning length (Z-axis) : 11.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
United States
New York
New York
Year of manufacture : 1984
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1983
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
32500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1968
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 5.8 in
Spindle bore : 1.2 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 5.8 in
Spindle bore : 1.2 in
7950 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1990
CNC control model : FANUC 0-TB
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Maximum travel length in the X-axis : 4.5 in
CNC control model : FANUC 0-TB
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Maximum travel length in the X-axis : 4.5 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : FANUC CONTROL SYSTEM II
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC CONTROL SYSTEM II
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2001
CNC control model : SIEMENS SINUMERIK 810 D
Length of the working table : 36.4 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : SIEMENS SINUMERIK 810 D
Length of the working table : 36.4 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1991
Maximum turning length (Z-axis) : 11 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
Maximum feed rate in Z-axis : 630 in/min
Maximum turning length (Z-axis) : 11 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
Maximum feed rate in Z-axis : 630 in/min
24500 USD
United States
Year of manufacture : 1996
CNC control model : GE FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Maximum table load (evenly distributed) : 1650 lb
CNC control model : GE FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Maximum table load (evenly distributed) : 1650 lb
12500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1990
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1962
Turning diameter over bed (max) : 9 in
Number of the rotary speed of the spindle : 10 pcs
Minimum rotary speed of the spindle : 450 1/min
Maximum rotary speed of the spindle : 4000 1/min
Turning diameter over bed (max) : 9 in
Number of the rotary speed of the spindle : 10 pcs
Minimum rotary speed of the spindle : 450 1/min
Maximum rotary speed of the spindle : 4000 1/min
1750 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2000
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 9.7 in
Number of spindles : 2 pcs
Maximum feed rate in X-axis : 472 in/min
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 9.7 in
Number of spindles : 2 pcs
Maximum feed rate in X-axis : 472 in/min
34500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1980
Maximum length of the turning : 17 in
Turning diameter over bed (max) : 9 in
Minimum rotary speed of the spindle : 230 1/min
Maximum rotary speed of the spindle : 3500 1/min
Maximum length of the turning : 17 in
Turning diameter over bed (max) : 9 in
Minimum rotary speed of the spindle : 230 1/min
Maximum rotary speed of the spindle : 3500 1/min
6950 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2004
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
24500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1972
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
14950 USD
United States
Pennsylvania
Pennsylvania
Lathes HARDINGE
Lathes HARDINGE HLV-H [7]Lathes HARDINGE DV-59 [3]
CNC Lathes and Turning Centers HARDINGE
CNC Lathes and Turning Centers HARDINGE GT-27 SP [6]CNC Lathes and Turning Centers HARDINGE GS 200 MY [2]
Milling Machines HARDINGE
Milling Machines HARDINGE U M [1]CNC Milling Machines and Machining Centers HARDINGE
CNC Milling Machines and Machining Centers HARDINGE VMC-1000 II [3]CNC Milling Machines and Machining Centers HARDINGE VMC 1000 [2]
