HARDINGE / page 2
Year of manufacture : 1980
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
26500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1991
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.1 in
Maximum travel length in the X-axis : 12 in
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.1 in
Maximum travel length in the X-axis : 12 in
24500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1995
CNC control model : FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Power of the spindle drive : 20 hp
CNC control model : FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 1997
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.4 in
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.4 in
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1985
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
United States
New York
New York
Year of manufacture : 1985
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
United States
New York
New York
Year of manufacture : 1984
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
United States
New York
New York
Year of manufacture : 2002
CNC control model : FANUC CNC CONTROL
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC CNC CONTROL
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
United States
New York
New York
Year of manufacture : 1994
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.9 in
Maximum turning diameter : 25.5 in
Maximum travel length in the X-axis : 8 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.9 in
Maximum turning diameter : 25.5 in
Maximum travel length in the X-axis : 8 in
United States
Michigan
Michigan
Year of manufacture : 1994
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.9 in
Maximum turning diameter : 25.5 in
Maximum travel length in the X-axis : 8 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.9 in
Maximum turning diameter : 25.5 in
Maximum travel length in the X-axis : 8 in
United States
Michigan
Michigan
Year of manufacture : 2000
CNC control model : FANUC 0-MD
Length of the working table : 17.3 in
Width of the working table : 7.9 in
Maximum table load (evenly distributed) : 1541 lb
CNC control model : FANUC 0-MD
Length of the working table : 17.3 in
Width of the working table : 7.9 in
Maximum table load (evenly distributed) : 1541 lb
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 13.1 in
Turning diameter over bed (max) : 21.2 in
Turning diameter over cross slide (max) : 9 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 13.1 in
Turning diameter over bed (max) : 21.2 in
Turning diameter over cross slide (max) : 9 in
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 22 in
Turning diameter over bed (max) : 26 in
Turning diameter over cross slide (max) : 10.4 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 22 in
Turning diameter over bed (max) : 26 in
Turning diameter over cross slide (max) : 10.4 in
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.9 in
Maximum turning diameter : 15.7 in
Maximum feed rate in X-axis : 472 in/min
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.9 in
Maximum turning diameter : 15.7 in
Maximum feed rate in X-axis : 472 in/min
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : FANUC 0M-D
Length of the working table : 24 in
Width of the working table : 12.2 in
Maximum table load (evenly distributed) : 500 lb
CNC control model : FANUC 0M-D
Length of the working table : 24 in
Width of the working table : 12.2 in
Maximum table load (evenly distributed) : 500 lb
United States
Ohio
Ohio
Year of manufacture : 1992
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Minimum rotary speed of the spindle : 125 1/min
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Minimum rotary speed of the spindle : 125 1/min
United States
Ohio
Ohio
Year of manufacture : 1981
Maximum length of the turning : 36 in
Turning diameter over bed (max) : 9 in
Turning diameter over cross slide (max) : 3.8 in
Power of the spindle : 2 hp
Maximum length of the turning : 36 in
Turning diameter over bed (max) : 9 in
Turning diameter over cross slide (max) : 3.8 in
Power of the spindle : 2 hp
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : SIEMENS SINUMERIK 810 SHOP M
Length of the working table : 47.2 in
Width of the working table : 17.7 in
Power of the spindle drive : 17.4 hp
CNC control model : SIEMENS SINUMERIK 810 SHOP M
Length of the working table : 47.2 in
Width of the working table : 17.7 in
Power of the spindle drive : 17.4 hp
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 2003
CNC control model : FANUC Oi-TB
Maximum turning length (Z-axis) : 15 in
Turning diameter over cross slide (max) : 18.7 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : FANUC Oi-TB
Maximum turning length (Z-axis) : 15 in
Turning diameter over cross slide (max) : 18.7 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 2000
CNC control model : FANUC O-MD
Length of the working table : 47.2 in
Width of the working table : 17.7 in
Power of the spindle drive : 17.4 hp
CNC control model : FANUC O-MD
Length of the working table : 47.2 in
Width of the working table : 17.7 in
Power of the spindle drive : 17.4 hp
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1987
CNC control model : SIEMENS GENERAL NUMERIC 810
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
CNC control model : SIEMENS GENERAL NUMERIC 810
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
United States
Illinois
Illinois
Year of manufacture : 1985
Turning diameter over bed (max) : 9 in
Power of the spindle : 1 hp
Minimum rotary speed of the spindle : 230 1/min
Maximum rotary speed of the spindle : 3500 1/min
Turning diameter over bed (max) : 9 in
Power of the spindle : 1 hp
Minimum rotary speed of the spindle : 230 1/min
Maximum rotary speed of the spindle : 3500 1/min
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : GE FANUC 18-T
Maximum turning length (Z-axis) : 22.8 in
Turning diameter over bed (max) : 26 in
Turning diameter over cross slide (max) : 10.4 in
CNC control model : GE FANUC 18-T
Maximum turning length (Z-axis) : 22.8 in
Turning diameter over bed (max) : 26 in
Turning diameter over cross slide (max) : 10.4 in
United States
Illinois
Illinois
Year of manufacture : 1990
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 13.9 in
Turning diameter over bed (max) : 21.2 in
Turning diameter over cross slide (max) : 8.3 in
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 13.9 in
Turning diameter over bed (max) : 21.2 in
Turning diameter over cross slide (max) : 8.3 in
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : GE FANUC 21i-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Turning diameter over cross slide (max) : 8.3 in
CNC control model : GE FANUC 21i-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Turning diameter over cross slide (max) : 8.3 in
United States
Illinois
Illinois
Year of manufacture : 1982
Maximum length of the turning : 17 in
Turning diameter over bed (max) : 8 in
Power of the spindle : 0.75 hp
Minimum rotary speed of the spindle : 230 1/min
Maximum length of the turning : 17 in
Turning diameter over bed (max) : 8 in
Power of the spindle : 0.75 hp
Minimum rotary speed of the spindle : 230 1/min
United States
Illinois
Illinois
Year of manufacture : 1986
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
United States
Illinois
Illinois
Lathes HARDINGE
Lathes HARDINGE DSM-59 [3]Lathes HARDINGE HLV-H-EM [2]
CNC Lathes and Turning Centers HARDINGE
CNC Lathes and Turning Centers HARDINGE CONQUEST VT-100 [2]CNC Lathes and Turning Centers HARDINGE CONQUEST 42 [2]
CNC Milling Machines and Machining Centers HARDINGE
CNC Milling Machines and Machining Centers HARDINGE VMC 1000 II [2]CNC Milling Machines and Machining Centers HARDINGE VMC 1000 [2]
