CNC Lathes OKUMA / page 2
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13.4 in
29500 USD
United States
California
California
Year of manufacture : 1996
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
CNC control model : OKUMA OSP-7000
Maximum turning length (Z-axis) : 119.3 in
Turning diameter over bed (max) : 25.4 in
Turning diameter over cross slide (max) : 13.7 in
37500 USD
United States
California
California
Year of manufacture : 2007
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
225000 USD
United States
California
California
Year of manufacture : 2004
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 21.7 in
Maximum feed rate in X-axis : 1181 in/min
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 21.7 in
Maximum feed rate in X-axis : 1181 in/min
United States
New York
New York
Year of manufacture : 1991
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
United States
New York
New York
Year of manufacture : 1994
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2010
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.8 in
Maximum travel length in the X-axis : 7.3 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
United States
South Carolina
South Carolina
Year of manufacture : 2002
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2008
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.8 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.8 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 1997
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP 700 L
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 2001
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Colorado
Colorado
Year of manufacture : 1997
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1997
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
France
Rhône
Rhône
Year of manufacture : 2012
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
United States
New York
New York
Year of manufacture : 1989
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1985
CNC control model : OKUMA OSP 3000 System L
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 393.7 in/min
CNC control model : OKUMA OSP 3000 System L
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 393.7 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1990
CNC control model : FANUC 15 TF
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 9.8 in
Maximum rotary speed of the main spindle : 4000 rpm
CNC control model : FANUC 15 TF
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 9.8 in
Maximum rotary speed of the main spindle : 4000 rpm
Germany
Rheinland-Pfalz
Rheinland-Pfalz
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 27.6 in
Turning diameter over bed (max) : 13.8 in
Number of spindles : 2 pcs
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 27.6 in
Turning diameter over bed (max) : 13.8 in
Number of spindles : 2 pcs
Germany
Year of manufacture : 2002
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 2006
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
United States
Arkansas
Arkansas
Year of manufacture : 1991
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
California
California
Year of manufacture : 1990
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
California
California
