CNC Lathes and Turning Centers OKUMA
Year of manufacture : 1992
Diameter of the spindle bore : 1.7 in
Diameter of the spindle bore : 1.7 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1995
CNC control model : OSP7000L
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum travel length in the X-axis : 8.3 in
CNC control model : OSP7000L
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum travel length in the X-axis : 8.3 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 1989
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
8147 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1988
CNC control model : OSP 5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OSP 5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.8 in
United States
Colorado
Colorado
Year of manufacture : 1989
CNC control model : OKUMA OSP
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 19.7 in
CNC control model : OKUMA OSP
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 19.7 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1991
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 472 in/min
United States
New York
New York
Year of manufacture : 1994
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 19.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
United States
South Carolina
South Carolina
Year of manufacture : 1989
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1980
Maximum turning length (Z-axis) : 49.2 in
Maximum travel length in the X-axis : 13.4 in
Maximum feed rate in X-axis : 236.2 in/min
Maximum feed rate in Z-axis : 0 ft/min
Maximum turning length (Z-axis) : 49.2 in
Maximum travel length in the X-axis : 13.4 in
Maximum feed rate in X-axis : 236.2 in/min
Maximum feed rate in Z-axis : 0 ft/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1985
CNC control model : OKUMA OSP 3000 System L
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 393.7 in/min
CNC control model : OKUMA OSP 3000 System L
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 393.7 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1990
CNC control model : FANUC 15 TF
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 9.8 in
Maximum rotary speed of the main spindle : 4000 rpm
CNC control model : FANUC 15 TF
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 9.8 in
Maximum rotary speed of the main spindle : 4000 rpm
Germany
Rheinland-Pfalz
Rheinland-Pfalz
Year of manufacture : 1982
CNC control model : OKUMA OSP 5000
Turning diameter over bed (max) : 21.7 in
Number of CNC controlled axles : 4 pcs
C-axis indexed
CNC control model : OKUMA OSP 5000
Turning diameter over bed (max) : 21.7 in
Number of CNC controlled axles : 4 pcs
C-axis indexed
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1981
CNC control model : OKUMA OSP-2200 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.4 in
CNC control model : OKUMA OSP-2200 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.4 in
United States
California
California
Year of manufacture : 1989
CNC control model : OKUMA CNC CONTROL
CNC control model : OKUMA CNC CONTROL
United States
California
California
Year of manufacture : 1991
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
California
California
Year of manufacture : 1990
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
California
California
Year of manufacture : 1989
CNC control model : OKUMA OSP 5000 L-G
Maximum turning length (Z-axis) : 50 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
CNC control model : OKUMA OSP 5000 L-G
Maximum turning length (Z-axis) : 50 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
United States
Florida
Florida
Year of manufacture : 1992
CNC control model : OKUMA OSP-5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP-5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 1991
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 25.5 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.7 in
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 25.5 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.7 in
United States
Michigan
Michigan
Year of manufacture : 1994
CNC control model : OKUMA OSP 7000 L
Total number of tools in the turret : 12 pcs
Bar feeder
Chip transporter
CNC control model : OKUMA OSP 7000 L
Total number of tools in the turret : 12 pcs
Bar feeder
Chip transporter
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1995
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 18.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.1 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 18.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.1 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
United States
Michigan
Michigan
Year of manufacture : 1980
CNC control model : OKUMA OSP 3000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP 3000 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 11.8 in
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1990
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
United States
Illinois
Illinois
Year of manufacture : 1988
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
United States
Illinois
Illinois
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
CNC Lathes OKUMA
CNC Lathes OKUMA LB 15 [4]CNC Lathes OKUMA LB-25 [3]
CNC Automatic Lathes OKUMA
CNC Automatic Lathes OKUMA LU3000EX [1]CNC Automatic Lathes OKUMA HL-20 [1]
Turning and Milling Centers OKUMA
Turning and Milling Centers OKUMA MACTURN 250 W [2]Turning and Milling Centers OKUMA VTM-1200YB [1]
CNC Vertical Lathes OKUMA
CNC Vertical Lathes OKUMA V 60 RM [1]CNC Vertical Lathes OKUMA V 100 R [1]
CNC Vertical Turret Lathes OKUMA
CNC Vertical Turret Lathes OKUMA LVT-300 M [1]CNC Vertical Turret Lathes OKUMA V 80 R [1]
CNC Facing Lathes OKUMA
CNC Facing Lathes OKUMA LH55-N [1]CNC Heavy Duty Lathes OKUMA
CNC Heavy Duty Lathes OKUMA LB 3000 EX [1]
