Bed Milling Machine TOS Kurim FCV-50 NC

Category Milling Machines TOS Kurim ›
Manufacturer TOS Kurim ›

ARCHIVED AD
Bed Milling Machine TOS Kurim FCV-50 NC was manufactured by the machine manufacturer TOS Kurim. Machine TOS Kurim FCV-50 NC was built in 1983 year.

General data

Location Slovakia
region Bratislavský kraj
Year of manufacture 1983
Warranty Without warranty
Technical condition Good
Loading The seller organizes the loading - included in the price of the machine
Payment Before receipt
Status Machine unplugged
Stock number 171120

Technical parameters

Length of the working table 78.7 in
Width of the working table 21.7 in
Maximum table load (evenly distributed) 1873.9 lb
Power of the spindle drive 18.8 hp
Number of rotary speeds of the vertical spindle 12 pcs
Minimum rotary speed of the vertical spindle 45 1/min
Maximum rotary speed of the vertical spindle 1400 1/min
Minimum distance of the spindle from the table 1.8 in
Maximum distance of the spindle from the table 25.2 in
Throat depth (distance of the spindle axis from the frame) 3.1 in
Travel length X-axis (mechanical feed) 49.2 in
Travel length Y-axis (mechanical feed) 24.4 in
Travel length Z-axis (mechanical feed) 22.8 in
Maximum feed rate in X-axis 78.7 in/s
Maximum feed rate in Y-axis 19.7 in/s
Maximum feed rate in Z-axis 19.7 in/s
Total power demand 28.2 hp
Number of T-slots in the table 8 pcs
Machine height 94.5 in
Machine length 117.3 in
Machine width 87.6 in
Machine weight 7.7 short ton

Equipment

Travel length of the quill
Swivel head (1 axis)
Smooth adjustment of the vertical spindle speed
Quill feed
Spindle drive on overarm
Automatic feed in the axis X and Y
Rapid feed of the table
Smooth adjustment of the feed rate
Independent feed drive for each axis
Arbor support
Central lubrication
Liquid cooling system
Lighting
Technical documentation
‹ previous Stanko 1M63 PFAUTER P251 TOS Kurim FCV-50 NC Dener 3100 X 80 Smart Avia FND 32 TE next ›