2D WaterJet CALYPSO SHARK 5 X 10
2D WaterJet CALYPSO SHARK 5 X 10 was manufactured by the machine manufacturer CALYPSO. Machine CALYPSO SHARK 5 X 10 was built in 1997 year.
General data | |
|---|---|
| Location | United States |
| region | California |
| Year of manufacture | 1997 |
| Warranty | Without warranty |
Technical parameters | |
|---|---|
| Length of the working table | 65 in |
| Width of the working table | 145 in |
| Maximum table load (evenly distributed) | 10000 lb |
| Travel length Z-axis | 6 in |
| Maximum feed rate in X-axis | 100 in/min |
| Maximum feed rate in Y-axis | 100 in/min |
| Maximum feed rate in Z-axis | 100 in/min |
| Pump power | 30 hp |
| Maximum working pressure | 55000 psi |
Equipment | |
|---|---|
| no data | |
