2D Laser TRUMPF TRULASER 1030 FIBER
2D Laser TRUMPF TRULASER 1030 FIBER was manufactured by the machine manufacturer TRUMPF. Machine TRUMPF TRULASER 1030 FIBER was built in 2015 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 2015 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Laser power | 2 kW |
| Length of the working table | 59.1 in |
| Width of the working table | 118.1 in |
| Maximum thickness of the cut sheet metal (Normal Steel) | 0.472441 in |
| Maximum thickness of the cut sheet metal (Stainless Steel) | 0.23622 in |
| Maximum thickness of the cut sheet metal (Aluminum) | 0.19685 in |
| Travel length X-axis | 3 in |
| Maximum feed rate with simultaneous operation of the X and Y axis drives | 1574.8 in/min |
| Total power demand | 13.4 hp |
| Machine height | 90.4 in |
| Machine length | 311.4 in |
| Machine width | 105.9 in |
| Machine weight | 9.6 short ton |
Equipment | |
|---|---|
| N2 laser gas | |
| Gas installation | |
