OKUMA
Year of manufacture : 2000
CNC control model : OKUMA OSP-U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : OKUMA OSP-U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
19046 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2001
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1997
CNC control model : OKUMA OSP7000L
Maximum turning length (Z-axis) : 27.6 in
Maximum travel length in the X-axis : 6.6 in
Maximum rotary speed of the main spindle : 4500 rpm
CNC control model : OKUMA OSP7000L
Maximum turning length (Z-axis) : 27.6 in
Maximum travel length in the X-axis : 6.6 in
Maximum rotary speed of the main spindle : 4500 rpm
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1992
Diameter of the spindle bore : 1.7 in
Diameter of the spindle bore : 1.7 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1997
CNC control model : OKUMA OSP7000L
Maximum travel length in the X-axis : 6.6 in
C-axis synchronous
CNC control model : OKUMA OSP7000L
Maximum travel length in the X-axis : 6.6 in
C-axis synchronous
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1996
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum rotary speed of the main spindle : 3500 rpm
Length of the lathe : 177.2 in
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum rotary speed of the main spindle : 3500 rpm
Length of the lathe : 177.2 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2001
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : OSP U100M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1996
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Maximum rotary speed of the main spindle : 4500 rpm
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Maximum rotary speed of the main spindle : 4500 rpm
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1995
CNC control model : OSP7000L
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum travel length in the X-axis : 8.3 in
CNC control model : OSP7000L
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 16.5 in
Maximum travel length in the X-axis : 8.3 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 1989
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
8147 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1999
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Spain
Barcelona
Barcelona
Year of manufacture : 1983
CNC control model : OSP 500 G-G
Minimum diameter of the grinded hole : 0.11811 in
Maximum diameter of the grinded hole : 2 in
CNC control model : OSP 500 G-G
Minimum diameter of the grinded hole : 0.11811 in
Maximum diameter of the grinded hole : 2 in
Italy
Milano
Milano
Year of manufacture : 1997
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
France
Rhône
Rhône
Year of manufacture : 1998
Number of tools in the magazine : 154 pcs
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 24 in
Number of tools in the magazine : 154 pcs
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 24 in
Italy
Year of manufacture : 1989
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1980
Maximum turning length (Z-axis) : 49.2 in
Maximum travel length in the X-axis : 13.4 in
Maximum feed rate in X-axis : 236.2 in/min
Maximum feed rate in Z-axis : 0 ft/min
Maximum turning length (Z-axis) : 49.2 in
Maximum travel length in the X-axis : 13.4 in
Maximum feed rate in X-axis : 236.2 in/min
Maximum feed rate in Z-axis : 0 ft/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2000
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Number of tools in the magazine : 20 pcs
Minimum rotary speed of the vertical spindle : 50 1/min
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Number of tools in the magazine : 20 pcs
Minimum rotary speed of the vertical spindle : 50 1/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1997
CNC control model : OKUMA OSP U 10 N
Length of the working table : 39.4 in
Width of the working table : 16.9 in
Maximum table load (evenly distributed) : 1322.8 lb
CNC control model : OKUMA OSP U 10 N
Length of the working table : 39.4 in
Width of the working table : 16.9 in
Maximum table load (evenly distributed) : 1322.8 lb
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1985
CNC control model : OKUMA OSP 3000 System L
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 393.7 in/min
CNC control model : OKUMA OSP 3000 System L
Maximum turning length (Z-axis) : 20.5 in
Maximum travel length in the X-axis : 6.9 in
Maximum feed rate in X-axis : 393.7 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1990
CNC control model : FANUC 15 TF
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 9.8 in
Maximum rotary speed of the main spindle : 4000 rpm
CNC control model : FANUC 15 TF
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 9.8 in
Maximum rotary speed of the main spindle : 4000 rpm
Germany
Rheinland-Pfalz
Rheinland-Pfalz
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 27.6 in
Turning diameter over bed (max) : 13.8 in
Number of spindles : 2 pcs
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 27.6 in
Turning diameter over bed (max) : 13.8 in
Number of spindles : 2 pcs
Germany
Year of manufacture : 1982
CNC control model : OKUMA OSP 5000
Turning diameter over bed (max) : 21.7 in
Number of CNC controlled axles : 4 pcs
C-axis indexed
CNC control model : OKUMA OSP 5000
Turning diameter over bed (max) : 21.7 in
Number of CNC controlled axles : 4 pcs
C-axis indexed
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1999
Length of the working table : 39.4 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 1102.3 lb
Number of tools in the magazine : 32 pcs
Length of the working table : 39.4 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 1102.3 lb
Number of tools in the magazine : 32 pcs
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1994
CNC control model : OKUMA OSP 7000 L
Total number of tools in the turret : 12 pcs
Bar feeder
Chip transporter
CNC control model : OKUMA OSP 7000 L
Total number of tools in the turret : 12 pcs
Bar feeder
Chip transporter
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 41.3 in
Turning diameter over bed (max) : 13.8 in
Diameter of the spindle bore : 2.8 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 41.3 in
Turning diameter over bed (max) : 13.8 in
Diameter of the spindle bore : 2.8 in
Germany
Year of manufacture : 1995
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 18.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.1 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 18.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.1 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 2001
CNC control model : OKUMA OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : OKUMA OSP U 100 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1763.7 lb
Germany
Bayern
Bayern
Lathes OKUMA
Lathes OKUMA LS 450x1250 [1]Lathes OKUMA V80R [1]
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LB 15 [4]CNC Lathes and Turning Centers OKUMA LT-25 [3]
Milling Machines OKUMA
Milling Machines OKUMA 5VS-NC [1]Milling Machines OKUMA 6VAE [1]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MC-V 4020 [6]CNC Milling Machines and Machining Centers OKUMA MX 45 VAE [4]
Grinding Machines OKUMA
Grinding Machines OKUMA GI-5 N [1]Grinding Machines OKUMA GP-26 T X 65 [1]
