DOOSAN
Year of manufacture : 2008
Travel length X-axis (mechanical feed) : 31.5 in
Travel length Y-axis (mechanical feed) : 25.6 in
Travel length Z-axis (mechanical feed) : 29.5 in
Travel length X-axis (mechanical feed) : 31.5 in
Travel length Y-axis (mechanical feed) : 25.6 in
Travel length Z-axis (mechanical feed) : 29.5 in
25000 USD
United States
California
California
Year of manufacture : 2012
CNC control model : FANUC Oi-MB FANUC Oi-MB
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : FANUC Oi-MB FANUC Oi-MB
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Year of manufacture : 2007
CNC control model : FANUC 0i-TC
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 43.3 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : FANUC 0i-TC
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 43.3 in
Maximum travel length in the X-axis : 22.8 in
United States
Colorado
Colorado
Year of manufacture : 2012
CNC control model : FANUC Oi-TD
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 20 in
Turning diameter over cross slide (max) : 11.4 in
CNC control model : FANUC Oi-TD
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 20 in
Turning diameter over cross slide (max) : 11.4 in
United States
Colorado
Colorado
Year of manufacture : 2013
CNC control model : FANUC 31i-A
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 881.8 lb
CNC control model : FANUC 31i-A
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 881.8 lb
United States
Colorado
Colorado
Year of manufacture : 1998
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2200 lb
United States
Colorado
Colorado
Year of manufacture : 2013
CNC control model : DOOSAN CNC CONTROL
Maximum turning length (Z-axis) : 32 in
Maximum turning diameter : 43.3 in
Maximum feed rate in X-axis : 787 in/min
CNC control model : DOOSAN CNC CONTROL
Maximum turning length (Z-axis) : 32 in
Maximum turning diameter : 43.3 in
Maximum feed rate in X-axis : 787 in/min
United States
Colorado
Colorado
Year of manufacture : 2003
CNC control model : FANUC CNC CONTROL
CNC control model : FANUC CNC CONTROL
United States
California
California
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 20.5 in
Width of the working table : 53.2 in
Number of tools in the magazine : 24 pcs
CNC control model : FANUC 0i-MB
Length of the working table : 20.5 in
Width of the working table : 53.2 in
Number of tools in the magazine : 24 pcs
United States
California
California
Year of manufacture : 2012
CNC control model : FANUC 0i-TD
Maximum turning length (Z-axis) : 26.8 in
Turning diameter over bed (max) : 23.2 in
Turning diameter over cross slide (max) : 17.7 in
CNC control model : FANUC 0i-TD
Maximum turning length (Z-axis) : 26.8 in
Turning diameter over bed (max) : 23.2 in
Turning diameter over cross slide (max) : 17.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 53.1 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1870 lb
CNC control model : FANUC 0i-MB
Length of the working table : 53.1 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1870 lb
United States
South Carolina
South Carolina
Year of manufacture : 2012
CNC control model : FANUC 31i
Length of the working table : 49.2 in
Width of the working table : 49.2 in
Maximum table load (evenly distributed) : 6613 lb
CNC control model : FANUC 31i
Length of the working table : 49.2 in
Width of the working table : 49.2 in
Maximum table load (evenly distributed) : 6613 lb
United States
New York
New York
Year of manufacture : 2012
CNC control model : FANUC 31i
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613 lb
CNC control model : FANUC 31i
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613 lb
United States
New York
New York
Year of manufacture : 2012
CNC control model : FANUC SERIES i Liquid Crys
Maximum turning length (Z-axis) : 50.4 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 15.7 in
CNC control model : FANUC SERIES i Liquid Crys
Maximum turning length (Z-axis) : 50.4 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 15.7 in
United States
Wisconsin
Wisconsin
Year of manufacture : 2008
CNC control model : FANUC 21i-TB
Diameter of the table : 20 in
Total number of tools in the turret : 4 pcs
Number of CNC controlled axles : 3 pcs
CNC control model : FANUC 21i-TB
Diameter of the table : 20 in
Total number of tools in the turret : 4 pcs
Number of CNC controlled axles : 3 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 2006
CNC control model : FANUC 18i-TB
Number of spindles : 2 pcs
Maximum power of the main spindle : 30 hp
Maximum rotary speed of the main spindle : 5000 rpm
CNC control model : FANUC 18i-TB
Number of spindles : 2 pcs
Maximum power of the main spindle : 30 hp
Maximum rotary speed of the main spindle : 5000 rpm
United States
Wisconsin
Wisconsin
Year of manufacture : 2008
CNC control model : FANUC 21i-MB
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 35 hp
CNC control model : FANUC 21i-MB
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 35 hp
United States
California
California
Year of manufacture : 2008
CNC control model : FANUC 21i-M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 25 hp
CNC control model : FANUC 21i-M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 25 hp
United States
California
California
Year of manufacture : 2011
CNC control model : FANUC 31i
Length of the working table : 19.6 in
Width of the working table : 19.6 in
Maximum rotary speed of the spindle : 6000 1/min
CNC control model : FANUC 31i
Length of the working table : 19.6 in
Width of the working table : 19.6 in
Maximum rotary speed of the spindle : 6000 1/min
United States
California
California
Year of manufacture : 2008
CNC control model : FANUC 21i-M
Length of the working table : 25.6 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 660 lb
CNC control model : FANUC 21i-M
Length of the working table : 25.6 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 660 lb
United States
California
California
Year of manufacture : 2012
CNC control model : FANUC 0i-TD
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 28.7 in
Maximum travel length in the X-axis : 15.4 in
CNC control model : FANUC 0i-TD
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 28.7 in
Maximum travel length in the X-axis : 15.4 in
United States
California
California
Year of manufacture : 2007
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 20.1 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 20.1 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
United States
California
California
Year of manufacture : 2007
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
United States
California
California
Year of manufacture : 2008
CNC control model : FA 21i-TB
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 15.7 in
Maximum travel length in the X-axis : 11.1 in
CNC control model : FA 21i-TB
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 15.7 in
Maximum travel length in the X-axis : 11.1 in
United States
California
California
Year of manufacture : 2007
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 31.5 in
Maximum travel length in the X-axis : 15.4 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 31.5 in
Maximum travel length in the X-axis : 15.4 in
United States
California
California
Year of manufacture : 2007
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
United States
California
California
Year of manufacture : 2006
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 33.5 in
Maximum turning diameter : 39.4 in
Maximum travel length in the X-axis : 18.5 in
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 33.5 in
Maximum turning diameter : 39.4 in
Maximum travel length in the X-axis : 18.5 in
United States
California
California
Year of manufacture : 2012
CNC control model : FANUC 0i-TD
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 28.7 in
Maximum travel length in the X-axis : 15.4 in
CNC control model : FANUC 0i-TD
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 28.7 in
Maximum travel length in the X-axis : 15.4 in
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP CONTROL
Maximum turning length (Z-axis) : 36.3 in
Turning diameter over bed (max) : 13.8 in
Subspindle
CNC control model : OKUMA OSP CONTROL
Maximum turning length (Z-axis) : 36.3 in
Turning diameter over bed (max) : 13.8 in
Subspindle
United States
California
California
Year of manufacture : 2014
CNC control model : FANUC 31i-A
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 78.7 in
CNC control model : FANUC 31i-A
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 78.7 in
United States
Georgia
Georgia
Lathes DOOSAN
Lathes DOOSAN PUMA 400MB [1]Lathes DOOSAN 400MB [1]
CNC Lathes and Turning Centers DOOSAN
CNC Lathes and Turning Centers DOOSAN PUMA 2600 B [4]CNC Lathes and Turning Centers DOOSAN PUMA 300 LC [3]
CNC Milling Machines and Machining Centers DOOSAN
CNC Milling Machines and Machining Centers DOOSAN HM 1250 [5]CNC Milling Machines and Machining Centers DOOSAN Lynx 220 Lc [3]
Boring Machines DOOSAN
Boring Machines DOOSAN DBC 130 [4]Boring Machines DOOSAN DB 130-CX [2]
Industrial Robots DOOSAN
Industrial Robots DOOSAN M0617 [1]Forklifts DOOSAN
Forklifts DOOSAN B25X-7 [1]
